2016年11月27日星期日

Battery Co Detector from China Carbon Monoxide Alarm manufacturer

Battery Co Detector

Battery Co Detector Installation:

1. Choose a suitable spot to install, then mount and fix the bracket to the wall or ceiling. Attach the Battery Co Detector and make sure it is securely connected with the bracket.
2. Battery Co Detector is suitable for bedrooms, kitchens, garages, basements, etc. An ideal installation spot is the center between a bedroom and the living room, which will cover a wider area.
3. If installed surface mount on a wall, it should be less than 4 meters from the floor. If installed flush mount in the wall, the distance between the position on the wall and ceiling should be 10cm to 20cm.
4. When installing the Battery Co Detector, it should not be installed next to a door or window, where there is a draft, in order to maximize the sensitivity of the Battery Co Detector. The recommended number of units per area: one in 10—20 square meters.
5. In special locations and under special conditions, it may be necessary to use more than one unit 2.5meters apart. Don't install it in damp places such as bathrooms, open areas, etc.

Battery Co Detector
If you are interest in our Battery Co Detector, please contact us.

this article is published by China Battery Co Detector manufacturer and supplier - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Battery-Co-Detector.htm

没有评论:

发表评论