2016年12月4日星期日

Co Gas Detector from China Carbon Monoxide Alarm manufacturer

The Importance of Co Gas Detector:

Co Gas is the byproduct of combustion. Sources of Carbon Monoxide can include furnaces, gas appliances, vehicles, and anything else that uses a combustion process. Carbon Monoxide is particularly dangerous because it is odorless. People can be exposed to it for an extended period of time and be totally unaware. Inhalation of carbon monoxide can lead to fainting or even death.

Both carbon monoxide and combustible gas present a significant threat to human safety. All homes should have Co Gas Detector, if any combustible gases are used in the house, detectors for combustible gas.

When the flammable gas density reaches to response setting value of density in its surrounding environment, the alarm can give out alarm signal of sound, light and networking. In the alarm state, the ambient concentration of combustible gas down to the rated value, the alarm can be automatically restored to normal monitoring state. Co Gas Detector has red, yellow, green three state indicator lights and one built-in buzzer, show the following three kinds of states separately:
1. Green indicator lights up, the power supply operates normally, and in the state of monitoring; 
2. Yellow indicator lights up with the sound of the buzzer, alarm faults(mainly on sensor);
3. Red indicator lights up, with the buzzer noise and networking output, indicate the alarm is in alarm state.

Co Gas Detector
If you are interest in our Co Gas Detector, please contact us.

this article is published by China manufacturer and supplier of Co Gas Detector - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Co-Gas-Detector.htm

2016年11月27日星期日

Battery Co Detector from China Carbon Monoxide Alarm manufacturer

Battery Co Detector

Battery Co Detector Installation:

1. Choose a suitable spot to install, then mount and fix the bracket to the wall or ceiling. Attach the Battery Co Detector and make sure it is securely connected with the bracket.
2. Battery Co Detector is suitable for bedrooms, kitchens, garages, basements, etc. An ideal installation spot is the center between a bedroom and the living room, which will cover a wider area.
3. If installed surface mount on a wall, it should be less than 4 meters from the floor. If installed flush mount in the wall, the distance between the position on the wall and ceiling should be 10cm to 20cm.
4. When installing the Battery Co Detector, it should not be installed next to a door or window, where there is a draft, in order to maximize the sensitivity of the Battery Co Detector. The recommended number of units per area: one in 10—20 square meters.
5. In special locations and under special conditions, it may be necessary to use more than one unit 2.5meters apart. Don't install it in damp places such as bathrooms, open areas, etc.

Battery Co Detector
If you are interest in our Battery Co Detector, please contact us.

this article is published by China Battery Co Detector manufacturer and supplier - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Battery-Co-Detector.htm

2016年11月20日星期日

AC Carbon Monoxide Detector from China Carbon Monoxide Alarm manufacturer

AC Carbon Monoxide Detector

AC Carbon Monoxide Detector adopts advanced gas-sensitive elements which with advanced gas detection industrial electric technique and technology. AC Carbon Monoxide Detector is a new standalone AC powered lpg and lng gas leak detector alarm, protecting your family from the dangers of explosive gas such as combustible gas and carbon monoxide gas. Once the gas concentration is over the pre-set alarm value, this AC Carbon Monoxide Detector will give out audible-visual alarm to remind people to take safety measures or drive the ventilation device so that the dangerous fire disaster can be prevented, people can be safe at home.

AC Carbon Monoxide Detector Features:

1. Detecting natural/methane gas and propane gas, coal gas and other combustible gas.
2. Professional low profile design with catalytic combustion gas sensor, special circuit (MCU processing control and SMT manufacture Technology).
3. Easy to install (Unit plugs directly into any wall outlet), easy operation(Clearly visible status indications LEDS).
4. Slim,small, compact design with stylish features, ideal for residential setting and modern decorations.

AC Carbon Monoxide Detector
If you are interest in our AC Carbon Monoxide Detector, please contact us.

this article is published by China manufacturer and supplier of AC Carbon Monoxide Detector - NINGBO SITERWELL ELECTRONICS CO.,LTD.

article from http://www.china-siter.com/tag/AC-Carbon-Monoxide-Detector.htm

2016年11月13日星期日

Zigbee Home Automation Devices from China Zigbee Home Automation Devices manufacturer

The Zigbee Smart House Technology:

ZigBee is the set of specs built around the IEEE 802.15.4 wireless protocol. It is wireless mesh network standard that short-distance, low Complexity, self-organization, low-power, low data rate, low products cost, bidirectional communications and high security, is very suitable for smart home system.

The Zigbee Home Automation Devices Features:

1. The Zigbee Home Automation Devices System is a easy-to-install and DIY system, support alert notification to mobile phones;
2. Fully compliant with Zigbee ZHA 1.2 and ZLL protocols as well as many international smart home systems;
3. The Zigbee Home Automation Devices System is extensible to support many other smart devices, including smart lighting, smart switches, and smart outlets and the CO/gas detector, which also can link shut-off valve and the window pusher;

NINGBO SITERWELL ELECTRONICS CO.,LTD supply Zigbee Home Automation Devices for Alarm Detectors, welcome to do business with us.

Zigbee Home Automation Devices

this article is published by China manufacturer and supplier of Zigbee Home Automation Devices - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Zigbee-Home-Automation-Devices.htm

2016年11月6日星期日

Z-Wave Home Automation Controller for smart home automation

Z-Wave Home Automation Controller means you can use mobile devices(such as IOS/Android smart phone, tablet or pc) to remote control home devices, including lights, door lock, electric curtain, IP camera, AC, TV, water heater, IR sensor, etc.

With Z-Wave Home Automation Controller, you can control and monitor your house's conditions anywhere and anytime. SITERWELL Z-Wave Home Automation System makes your life easier and more comfortable. It allows the completation control of a Z-Wave Home Automation Controller wireless solution via the Internet browser on your laptop and smart phone. Easy to use, the gateway is connected to your router via internet to your control center of your smart homes.
Z-Wave Home Automation Controller

The Z-Wave Home Automation Controller Features:

1. Z-Wave control is easily added to almost any device in minutes;
2. You can add Z-Wave to a device, a room, a floor or the entire home, according to your needs and desires;
3. Unlike costly whole-home control systems that need special wiring and professional installation, Z-Wave is accessible and easy for the do-it-yourselfer;
4. Z-Wave's intelligent mesh networking 'understands" the present status of any enabled device, and gives you confirmation that your devices have received the automatic or manual control commands you want;

If you are interest in our Z-Wave Home Automation Controller, please contact us. Email: sales@china-siter.com.

this article is published by China manufacturer and supplier of Z-Wave Home Automation Controller - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Z-Wave-Home-Automation-Controller.htm

2016年10月30日星期日

Home automation control solutions zigbee control smart wifi intelligent home system

ZigBee Intelligent Home Control System is consisted of three parts:

1. The first part of ZigBee Intelligent Home Control System is Smart APP. It is used to send signal to the central controller.
2. The second part of ZigBee Intelligent Home Control System is the controller and switch. The controller is used to receive signal of APP and send orders to each intelligent terminals. The switch is used to receive the order sent by the controller and complete relevant movement.
3. The third part of ZigBee Intelligent Home Control System is the terminal (including lights, door lock, electric curtain, IP camera, etc). Once the switch receives the order sent by the controller, it will send orders to the connected terminal; the terminal will follow the order to execute relevant movement.

With the Intelligent Home Control System, you can control and monitor your house's conditions anywhere and anytime. SITERWELL ZigBee Intelligent Home Control System makes your life easier and more comfortable.
Intelligent Home Control System
If you are interest in our Intelligent Home Control System, please contact us.

this article is published by China Intelligent Home Control System manufacturer and supplier - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Intelligent-Home-Control-System.htm

2016年10月23日星期日

Smart Home Automation Products

NINGBO SITERWELL ELECTRONICS CO.,LTD professional manufacture Smart Home Automation Products.

Our Smart Home Automation Products are completely wireless system centralized by a Home Automation Gateway that equipped with both ZigBee and Wi-Fi connectivity. The Gateway integrates the Home Area Network using its ZigBee connectivity, while connects to personal mobile devices directly or via a Cloud Server given its Wi-Fi connectivity.

We Choose Zigbee Technology in Smart Home Automation Products, because of ZIGBEE technology is the newly developed and widely used specs built on the protocol of IEEE802.15.4. Therefore, it is more faster and stable than the previous home automation products. Besides, it is environmental friendly, energy saving, easy and convenient to control. The more devices you install in a house, the much more stable the system is.

Meanwhile, the users could also simply use a Mini ZigBee remote controller to control the system. Thus enables consumers to enjoy the system not only whilst in their house but also anywhere else away from home.

ZIGBEE Technology Smart Home Automation Products


If you are interest in our ZIGBEE Technology Smart Home Automation Products, please contact us. Email: sales@china-siter.com.

this article is published by China Smart Home Automation Products manufacturer - NINGBO SITERWELL ELECTRONICS CO.,LTD

Article from http://www.china-siter.com/tag/Smart-Home-Automation-Products.htm