Battery Co Detector from China Carbon Monoxide Alarm manufacturer

Battery Co Detector

Battery Co Detector Installation:

1. Choose a suitable spot to install, then mount and fix the bracket to the wall or ceiling. Attach the Battery Co Detector and make sure it is securely connected with the bracket.
2. Battery Co Detector is suitable for bedrooms, kitchens, garages, basements, etc. An ideal installation spot is the center between a bedroom and the living room, which will cover a wider area.
3. If installed surface mount on a wall, it should be less than 4 meters from the floor. If installed flush mount in the wall, the distance between the position on the wall and ceiling should be 10cm to 20cm.
4. When installing the Battery Co Detector, it should not be installed next to a door or window, where there is a draft, in order to maximize the sensitivity of the Battery Co Detector. The recommended number of units per area: one in 10—20 square meters.
5. In special locations and under special conditions, it may be necessary to use more than one unit 2.5meters apart. Don't install it in damp places such as bathrooms, open areas, etc.


If you are interest in our Battery Co Detector, please contact us.

this article is published by China Battery Co Detector manufacturer and supplier - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Battery-Co-Detector.htm

AC Carbon Monoxide Detector from China Carbon Monoxide Alarm manufacturer

AC Carbon Monoxide Detector

AC Carbon Monoxide Detector adopts advanced gas-sensitive elements which with advanced gas detection industrial electric technique and technology. AC Carbon Monoxide Detector is a new standalone AC powered lpg and lng gas leak detector alarm, protecting your family from the dangers of explosive gas such as combustible gas and carbon monoxide gas. Once the gas concentration is over the pre-set alarm value, this AC Carbon Monoxide Detector will give out audible-visual alarm to remind people to take safety measures or drive the ventilation device so that the dangerous fire disaster can be prevented, people can be safe at home.

AC Carbon Monoxide Detector Features:

1. Detecting natural/methane gas and propane gas, coal gas and other combustible gas.
2. Professional low profile design with catalytic combustion gas sensor, special circuit (MCU processing control and SMT manufacture Technology).
3. Easy to install (Unit plugs directly into any wall outlet), easy operation(Clearly visible status indications LEDS).
4. Slim,small, compact design with stylish features, ideal for residential setting and modern decorations.


If you are interest in our AC Carbon Monoxide Detector, please contact us.

this article is published by China manufacturer and supplier of AC Carbon Monoxide Detector - NINGBO SITERWELL ELECTRONICS CO.,LTD.

article from http://www.china-siter.com/tag/AC-Carbon-Monoxide-Detector.htm

Zigbee Home Automation Devices from China Zigbee Home Automation Devices manufacturer

The Zigbee Smart House Technology:

ZigBee is the set of specs built around the IEEE 802.15.4 wireless protocol. It is wireless mesh network standard that short-distance, low Complexity, self-organization, low-power, low data rate, low products cost, bidirectional communications and high security, is very suitable for smart home system.

The Zigbee Home Automation Devices Features:

1. The Zigbee Home Automation Devices System is a easy-to-install and DIY system, support alert notification to mobile phones;
2. Fully compliant with Zigbee ZHA 1.2 and ZLL protocols as well as many international smart home systems;
3. The Zigbee Home Automation Devices System is extensible to support many other smart devices, including smart lighting, smart switches, and smart outlets and the CO/gas detector, which also can link shut-off valve and the window pusher;

NINGBO SITERWELL ELECTRONICS CO.,LTD supply Zigbee Home Automation Devices for Alarm Detectors, welcome to do business with us.



this article is published by China manufacturer and supplier of Zigbee Home Automation Devices - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Zigbee-Home-Automation-Devices.htm

Z-Wave Home Automation Controller for smart home automation

Z-Wave Home Automation Controller means you can use mobile devices(such as IOS/Android smart phone, tablet or pc) to remote control home devices, including lights, door lock, electric curtain, IP camera, AC, TV, water heater, IR sensor, etc.

With Z-Wave Home Automation Controller, you can control and monitor your house's conditions anywhere and anytime. SITERWELL Z-Wave Home Automation System makes your life easier and more comfortable. It allows the completation control of a Z-Wave Home Automation Controller wireless solution via the Internet browser on your laptop and smart phone. Easy to use, the gateway is connected to your router via internet to your control center of your smart homes.

The Z-Wave Home Automation Controller Features:

1. Z-Wave control is easily added to almost any device in minutes;
2. You can add Z-Wave to a device, a room, a floor or the entire home, according to your needs and desires;
3. Unlike costly whole-home control systems that need special wiring and professional installation, Z-Wave is accessible and easy for the do-it-yourselfer;
4. Z-Wave's intelligent mesh networking 'understands" the present status of any enabled device, and gives you confirmation that your devices have received the automatic or manual control commands you want;

If you are interest in our Z-Wave Home Automation Controller, please contact us. Email: sales@china-siter.com.

this article is published by China manufacturer and supplier of Z-Wave Home Automation Controller - NINGBO SITERWELL ELECTRONICS CO.,LTD

article from http://www.china-siter.com/tag/Z-Wave-Home-Automation-Controller.htm